• .: Innovative Solutions in Water Management Systems :.

PRV Controller

DMA Kontrol Odası

Electronic PRV Controller

Electronic PRV Controller is the most important and indispensable equipment of pressure management application. It consists of two separate control units, Electronic and Hydraulic. The electronic part evaluates the pressure in the network by evaluating the flow and pressure information. It transfers all the values it measures to the system center with its internal GSM communication module. With bidirectional online communication feature, it receives and processes commands sent from the system center to the field.

The hydraulic unit controls the pressure control valve through the valves in it according to the orders coming from the electronic control unit. The hydraulic unit also performs the pressure measurement at the DMA inlet and inside the DMA then sends the measured values to the electronic unit.

The controller is mounted on the wall in a suitable area in the DMA management room. Pilot water taken from the line is connected to the hydraulic unit of the controller. At the same time, the connection between the hydraulic unit and the valve is provided to control the pressure control valve. Since the valve drive method is hydraulic, there is no need for an external energy source as in valves with electric actuators.

Electronic PRV Controller can be used in 4 different operating modes:

1- Flow Sensitive Pressure Control

It is the pressure management performed by referencing the flow information from a flow meter or mechanical meter in the DMA chamber.

2- Scheduled Pressure Control

It is the press management in which the desired pressure is set at the desired time according to the tariff information entered on the controller calendar.

3- Critical Point Referenced Pressure Control

Pressure management based on data from the critical point recorder located in the DMA.

4- Constant Pressure Control

It is the pressure method applied in DMAs where the network pressure should be kept constant..

Technical specifications

Su Yönetim Sistemi

SCADASU Web Based Management and Monitoring Software supports:

  • Monitoring Instant and Historical Data.
  • Examining with Detailed Graphics.
  • Advanced Historical Reporting and Comparison.
  • Remote Parameter Change.
  • Remote Valve Opening / Closing.
  • Creating and Managing Alarms.
  • Night Flow Analysis.
  • Detailed User / Role Management
  • Failure and Planned Maintenance Tracking

You can easily carry out the above transactions from anywhere over internet.

Rapid response in an emergency

When unexpected situation occurs, you can quickly send full open and close command to the pressure control valve.

Integrated System

Integrated with Scada System

Online Communication

Bidirectional Real Time Communication!

services single
services single

Advanced Web Based Management

SCADASU Web-based management software can be integrated with your other systems and easily manage from devices such as computers, smartphones and tablets.